Industry leaders since 1992
Fast delivery
Trade counter collection
Experts available 24/7
Read our Trustpilot reviews
COMPRESSOR SIZING & PERFORMANCE

7 Signs Your Air Compressor Is Too Small

Pressure drops, extended running and production delays may all indicate that your compressed-air demand has outgrown the installed compressor.

Request a Compressor Quote →
Tanair variable speed compressed air equipment for busy workshops

As workshops expand and production processes change, the compressor that once supported the site may struggle to keep up. But poor performance does not always mean you need a bigger machine.

At Compressed Air Systems UK, we've helped businesses select, install and maintain compressed-air equipment since 1992. Our advice starts with the application, not simply the size of the old machine.

Since 1992Compressed-air expertise
UK-WideEquipment and engineering
System ReviewsSizing and energy advice
24/7 SupportEmergency breakdown line
IS YOUR SYSTEM KEEPING UP?

The seven warning signs

1

Pressure falls when several tools are in use

The system may not deliver enough airflow at the required pressure during periods of peak demand.

2

The compressor runs for unusually long periods

Persistent operation can indicate high demand, leakage or a problem with controls. Running continuously is not automatically a fault for a correctly rated screw compressor.

3

Tools lose power or become inconsistent

Pneumatic equipment may perform poorly if pressure at the tool falls below its requirement.

4

Production slows at busy times

Operators may need to stagger equipment because the air supply cannot support simultaneous use.

5

You have added new machinery since installation

A compressor sized for the original workshop may not cover the combined demands of new tools and processes.

6

Pressure recovery takes longer than expected

If the receiver cannot recover between cycles, investigate compressor delivery, system demand and any air losses.

7

Staff rely on temporary workarounds

Extra receivers, delayed tool use or frequent manual adjustments can signal a mismatch between supply and demand.

A common mistake

A falling pressure gauge does not prove the compressor itself is undersized. Blocked filters, undersized pipework, leaks, worn components and incorrect control settings can cause similar symptoms.

DIAGNOSE BEFORE BUYING

How to check whether the compressor is actually undersized

Record the compressor model and its free-air delivery at your operating pressure, then estimate or measure actual site demand. Motor power alone is not enough to establish available airflow.

Compare pressure at the compressor with pressure near the equipment during the busiest working period. A large difference may indicate a distribution or treatment restriction rather than insufficient compressor output.

Compressor-side checks

  • Pressure setpoint and operation
  • Air-end and filter condition
  • Loaded / unloaded or VSD behaviour
  • Receiver and safety equipment

System-side checks

  • Leaks and open blow guns
  • Pipe and hose diameters
  • Filter pressure drop
  • Peak simultaneous usage
STORAGE VS CONTINUOUS CAPACITY

Should you increase receiver size or compressor size?

An air receiver helps buffer short peaks and stabilise pressure, but it cannot create additional compressed air. If sustained demand exceeds the compressor’s available delivery, a larger receiver alone will not solve the underlying shortage.

For intermittent applications, storage may be a useful part of the answer. For continuous production, the compressor and pipework must be able to meet the ongoing requirement.

Avoid automatically replacing like-for-like

Before ordering another compressor, check whether your site’s demand has changed. We can review both current equipment and future production plans and advise on practical options.

OVERSIZING ALSO COSTS MONEY

What if your compressor is actually too large?

Oversizing a fixed-speed system may increase unloaded running and cycling. This is one reason we assess both peak demand and typical demand before selecting equipment. Read our guide to VSD compressor payback for applications with changing demand.

YOUR QUESTIONS ANSWERED

Frequently Asked Questions

Does low air pressure always mean I need a bigger compressor?

No. Leaks, poor distribution, filter restrictions and controls should be checked before assuming undersizing.

Can a bigger receiver make my compressor more powerful?

No. It can provide temporary storage, but it does not increase sustained compressor free-air delivery.

How do I size an air compressor for multiple tools?

Assess realistic simultaneous airflow demand at the working pressure and allow for system losses and duty cycle.

Can Tanair assess my existing installation?

Yes. We can help review compressed-air demand and advise on equipment selection, pipework and air treatment.

Need Help With Your Compressed-Air System?

We can help you select suitable equipment, review your existing installation and understand the total cost of ownership. Speak to a UK compressed-air specialist about your application.

Request a Quote →Call 0121 753 3330
Technical information: Any power, electricity-cost or energy-saving examples are illustrative and are not guaranteed results. Actual performance depends on the compressor, system design, operating conditions and maintenance. Always follow manufacturer documentation and applicable safety procedures.
Scroll to Top