PCL Dropout Water Separators Guide
Compare the PCL Dropout Water Separators range available from Tanair. Check connection size, capacity, drive size or application details on each linked product page so the selected PCL product matches the air system or workshop task.
Buyer guide3 linked productsDirect product links
Choosing the right option
Use these checks as a starting point, then confirm the exact specification on the individual product page.
- Compare rated flow capacity with the actual compressed-air demand.
- Check port size and material specification before installation.
- Allow suitable capacity headroom rather than sizing exactly at peak demand.
- Confirm pressure, flow and connection requirements on the product page.
Products covered in this guide
Open a product below to view its individual description, specification and current availability.
PCL PDO300S | Dropout Water Separator Stainless Steel, 450 l/min, 1/2 Ports
PCL PDO2000S | Dropout Water Separator Stainless Steel, 3,085 l/min, 1" Ports"
Product specifications and compatibility can vary between models. Always check the individual product page before ordering.
Frequently asked questions
Start with the intended application, then compare size, capacity, specification and compatibility on the linked product pages.
Not necessarily. Similar-looking products can differ in fitment, dimensions, rating or intended use, so check the exact specification before ordering.
Contact Tanair with the product code, equipment model and application details so the relevant information can be checked.
Need help choosing?
If the correct option is not obvious from the product information, contact Tanair with the model, part number or application details.