Air Lubricators
Shop Tanair compressed air lubricators for introducing a controlled oil mist into compatible pneumatic tools, air motors, valves and machinery.
Shop Air Lubricators
Choose the correct lubricator by connection size, required airflow, oil type, adjustment range and whether the downstream equipment is designed for oil-mist lubrication.
Tanair AL4000-04 1/2" BSP Lubricator
Compact air-line lubricator for introducing a controlled oil mist into compatible pneumatic systems.
Tanair L1361-C/MB 1/4" BSP Lubricator
Small industrial lubricator for controlled lubrication of compatible low-flow pneumatic equipment.
Tanair L1563-C/MB 1/2" BSP Lubricator
Larger lubricator for workshop and industrial air lines supplying compatible pneumatic equipment.
Air Lubricators for Compressed Air Systems
Air lubricators introduce a controlled oil mist into the compressed air stream. This can reduce friction and wear within suitable air tools, valves, cylinders, air motors and other pneumatic equipment that requires ongoing lubrication.
Choose the Correct Air Lubricator
Match the BSP Size
Confirm the inlet and outlet connection size before ordering.
Check Flow Capacity
An undersized lubricator can restrict airflow and reduce tool performance.
Use the Correct Lubricant
Use only the oil grade recommended for the lubricator and connected equipment.
Confirm Lubrication Is Required
Some modern tools and processes must remain oil free and should not receive oil mist.
How an Air-Line Lubricator Works
As compressed air passes through the lubricator, a small controlled quantity of oil is drawn from the bowl and introduced into the airflow as a fine mist. The oil is then carried downstream to compatible pneumatic equipment.
- Provides controlled lubrication for compatible pneumatic components.
- Helps reduce friction, sticking and premature wear.
- Supports reliable operation of suitable air tools and air motors.
- Allows the oil-feed rate to be adjusted for the application.
- Can be installed as the final stage of an FRL assembly.
Installation and Adjustment Guidance
- Install downstream of the filter and regulator.
- Follow the airflow direction marked from IN to OUT.
- Keep the bowl upright and accessible for inspection and filling.
- Use the correct pneumatic tool oil and avoid overfilling.
- Set the oil-feed rate while air is flowing through the equipment.
- Isolate and depressurise the system before filling or servicing.
Air Lubricator FAQs
What does an air lubricator do?
It introduces a controlled oil mist into the compressed air stream for compatible pneumatic equipment.
Where should a lubricator be installed?
It should normally be installed downstream of the filter and regulator, but upstream of the equipment requiring lubrication.
Can every air tool use a lubricator?
No. Confirm the equipment manufacturer allows continuous oil-mist lubrication before installation.
What oil should be used?
Use the pneumatic tool oil grade recommended by the lubricator and equipment manufacturer.
How much oil should the lubricator supply?
Adjust the feed while the equipment is running and follow the tool or machine manufacturer's lubrication guidance.
Can a lubricator be used on a paint line?
No. Oil mist can contaminate paint and finishing processes, so those air lines should remain oil free.
Industries We Support
Support & Aftercare
Our Expert Services
24/7 EMERGENCY BREAKDOWN
Rapid response for all air compressor malfunctions, anytime you need us.
View ServiceINSTALLATIONS
Expert design and bespoke pipework installations tailored to your site.
View ServiceSERVICING
Comprehensive maintenance to keep your air systems running at peak performance.
View ServiceVISIT OUR TRADE COUNTER
Come meet our experts in person at our dedicated Birmingham trade hub.
Get DirectionsSHOP NOW
Browse our full range of air compressors, parts, and industrial tools online.
Go To ShopCONTACT US
Have a question? Reach out to our team today for expert advice and support.
Send Message