Anti Vibration Mounts
Reduce transmitted vibration between compatible air compressors and their mounting surface with Tanair anti-vibration mounts in 8mm and 10mm stud sizes.
Anti Vibration Mounts for Air Compressors
Anti-vibration mounts sit between compatible equipment and its supporting surface to help isolate vibration generated during operation.
The current Tanair range contains two mount sets: an 8mm version and a 10mm version. Both are supplied as sets of four.
The key buying decision is to confirm the correct stud size and suitability for the compressor before ordering.
Shop Anti Vibration Mounts
Choose the correct stud size below. Product images, current pricing and stock status are pulled directly from WooCommerce.
-
Anti Vibration MountsTanair AVM2 | Anti Vibration Mounts (10mm)
£109.00 exc vat. Add to basketTanair AVM3 anti-vibration mount with a 10mm mounting size, designed to reduce transmitted vibration and help support compatible compressor installations.
In Stock£109.00 exc vat. -
Anti Vibration MountsTanair AVM1 | Anti Vibration Mounts (8mm)
£109.00 exc vat. Add to basketTanair AVM2 anti-vibration mount with a 8mm mounting size, designed to reduce transmitted vibration and help support compatible compressor installations.
In Stock£109.00 exc vat.
How to Choose the Correct Anti Vibration Mount
Confirm the Stud Size
The current range is split between 8mm and 10mm mounting options. Measure or verify the existing mounting arrangement before ordering.
Check the Compressor Installation
Confirm that the mount arrangement is appropriate for the compressor frame, mounting points and supporting surface.
Replace as a Matched Set
Where the existing mounts are equally aged or worn, replacing the complete set can help maintain a consistent mounting arrangement.
Do Not Select by Appearance
Mounts can look similar while using different stud sizes or load characteristics. Match the correct specification to the equipment.
Inspect Existing Condition
Look for cracking, hardening, deformation, damaged threads or excessive movement that may indicate replacement is needed.
Check the Wider Installation
Excessive vibration can also be caused by loose fixings, alignment issues, worn components or pipework strain.
Benefits of Anti Vibration Mounts
Reduce Transmitted Vibration
Helps isolate some compressor vibration from the supporting floor, frame or structure.
Support Stable Installation
Provides a compliant mounting interface where specified for compatible equipment.
Help Protect Connections
Reducing transmitted movement can help limit unnecessary stress on nearby rigid connections.
Workshop Installations
Useful where compressors are installed on suitable concrete floors, frames or supporting structures.
Replacement Maintenance
Suitable for replacing worn or deteriorated mounts when the correct size and specification are confirmed.
Noise & Vibration Control
Can form one part of a wider approach to managing equipment vibration and structure-borne noise.
What to Check
- Existing stud size — 8mm or 10mm
- Compressor make and model
- Existing mount condition
- Mounting-point arrangement
- Supporting surface and fixing method
- Whether all mounts are being replaced as a matched set
- Photograph of the existing mount or mounting point if uncertain
Compressor Installation & Vibration Support
Compressed Air Systems UK can also assist with compressor installation, servicing and fault finding where excessive movement or vibration forms part of a wider installation issue.
- Compressor installation support
- Mounting and positioning checks
- Pipework strain assessment
- Loose-fixing and alignment checks
- Routine compressor servicing
- Fault finding and repair support
Related Compressor Installation Ranges
Anti Vibration Mount FAQs
What anti-vibration mount sizes are available?
The current Tanair range contains an 8mm mount set and a 10mm mount set.
How many mounts are supplied?
The current product information states that the anti-vibration mounts are supplied as sets of four.
How do I know whether I need 8mm or 10mm mounts?
Check the existing mounting thread or compressor installation specification. If you are unsure, contact us with the compressor model and clear photos of the mounting points.
Will anti-vibration mounts stop all compressor vibration?
No. They help reduce transmitted vibration, but excessive vibration can also result from loose fixings, alignment problems, worn components, imbalance or installation issues.
Can I replace just one damaged mount?
That depends on the condition and specification of the remaining mounts. Where the existing mounts are equally aged or worn, replacing a matched set may be the better maintenance route.
Can Compressed Air Systems UK help me identify the correct set?
Yes. Call 0121 753 3330 with the compressor model and mounting details and we can help narrow down the correct option.
Need Help Choosing Anti Vibration Mounts?
Tell us the compressor model and whether the existing mounting thread is 8mm or 10mm and our team can help identify the correct set.
Industries We Support
Support & Aftercare
Our Expert Services
24/7 EMERGENCY BREAKDOWN
Rapid response for all air compressor malfunctions, anytime you need us.
View ServiceINSTALLATIONS
Expert design and bespoke pipework installations tailored to your site.
View ServiceSERVICING
Comprehensive maintenance to keep your air systems running at peak performance.
View ServiceVISIT OUR TRADE COUNTER
Come meet our experts in person at our dedicated Birmingham trade hub.
Get DirectionsSHOP NOW
Browse our full range of air compressors, parts, and industrial tools online.
Go To ShopCONTACT US
Have a question? Reach out to our team today for expert advice and support.
Send Message