Industry leaders since 1992
Fast delivery
Trade counter collection
Experts available 24/7
Read our Trustpilot reviews
Oil-Free Dental Air | Sound-Reduced | 230V

Dr Sonic Soundproofed Air Compressor

A compact oil-free piston compressor with a soundproof enclosure and 50 litre receiver for dental surgeries, laboratories and other suitable clean-air applications where lower operating noise matters.

Quiet Oil-Free Compressed Air in a Compact 230V Package

The Dr Sonic 320-50V-3M combines a VKM320 oil-free compressor pump, soundproof enclosure and internally protected 50 litre receiver. It is designed for installations where oil-free compression, compact dimensions and reduced sound levels are important.

This version does not include an integrated dryer, so the complete air-treatment arrangement should be selected around the air-quality requirement of the equipment being supplied.

235 L/min8.2 CFM stated air displacement.
8 bar116 psi maximum pressure.
50 litresCompact receiver capacity.
230V / 50 HzSingle-phase electrical supply.
60 dB(A)Manufacturer sound-pressure figure at 7 metres.

Size from Simultaneous Air Demand

Use the 235 L/min / 8.2 CFM stated displacement as a starting point, then check how much air the connected equipment can demand at the same time and allow sensible capacity for leakage and future requirements.

Confirm Pressure and Electrical Supply

The compressor is rated to 8 bar and uses a 230V / 50 Hz supply. Confirm the required working pressure, local electrical protection, isolation and installation conditions before ordering.

Plan Drying and Filtration Separately

Oil-free compression prevents lubricant being introduced by the compression process, but moisture, particles and the wider air-quality specification still need to be addressed by the complete installation.

Dr Sonic 320-50V-3M Soundproofed Compressor

For help checking airflow, pressure, electrical supply or the required dental air-treatment arrangement, call our compressed-air team on 0121 753 3330.

Dr Sonic 320-50V-3M Technical Guide

This soundproofed model is a 230V oil-free piston compressor without an integrated dryer. The figures below should be considered together with the connected equipment demand and the complete compressed-air treatment specification.

ModelAirflowPressureReceiverSupplyPowerSoundDryer
Dr Sonic 320-50V-3M235 L/min / 14 m3/h / 8.2 CFM8 bar / 116 psi max.50 litres230V / 50 Hz2.2 kW / 3 HP60 dB(A) at 7 mNot integrated

Airflow, Duty and Installation Considerations

Airflow

Check the combined demand of dental chairs, laboratory tools and other connected equipment that can operate together. Receiver volume cannot compensate for a compressor that is undersized for sustained demand.

Pressure

The compressor is rated to a maximum of 8 bar. Confirm the actual pressure needed at the point of use and allow for reasonable pressure loss through pipework, filters and treatment equipment.

Electrical Supply

The 320-50V-3M is a 230V / 50 Hz machine. A competent electrician should confirm the supply, protective device, isolation and local wiring requirements.

Receiver Capacity

The 50 litre receiver provides compact air storage and helps moderate compressor cycling. The required storage capacity still depends on demand profile, duty and the wider installation.

Noise

The manufacturer states 60 dB(A), measured as sound pressure at 7 metres. Room acoustics, ventilation openings, mounting and installation position can change the sound experienced on site.

Duty and Ventilation

Provide adequate ventilation and service access around the machine. Repeated high-duty operation should be checked against the compressor duty, ambient conditions and the real air-demand profile.

Drying and filtration

This model does not include a dryer. Where moisture control, particle removal or further air treatment is required, correctly sized equipment should be selected for the required airflow, pressure and target air quality.

Dental and medical air-quality requirements

Oil-free compression is an important part of many clean-air systems, but oil-free compression alone does not mean that a complete installation automatically satisfies every dental or medical air-quality requirement. Drying, filtration, pipework, receiver condition, maintenance, validation and the requirements of the connected equipment or applicable project standard all need to be considered.

Planning a regulated or specialist installation? If a project references HTM guidance, a manufacturer air-quality requirement or another defined standard, the complete compressed-air system should be assessed against that requirement rather than relying on the compressor specification alone.

Dr Sonic Soundproofed FAQs

Is the Dr Sonic 320-50V-3M oil-free?

Yes. It uses the VKM320 oil-free compressor pump, so lubricant is not introduced through the compression process.

Does this Dr Sonic model include a dryer?

No. The 320-50V-3M on this page is the soundproofed version without an integrated dryer. A separate Dr Sonic dryer-equipped range is available for installations that require that configuration.

What electrical supply does it need?

It is specified for 230V / 50 Hz. Confirm the site electrical supply, protection and isolation with a competent electrician before installation.

How quiet is the soundproofed enclosure?

The manufacturer states a sound-pressure level of 60 dB(A), measured at a distance of 7 metres. Actual sound on site will depend on the installation and surrounding room.

Can it be selected only by the number of dental chairs?

No. Chair count can be a useful application guide, but final sizing should be based on simultaneous airflow demand, pressure, duty, treatment equipment and the requirements of the connected dental equipment.

Does oil-free compression automatically make the installation compliant for dental or medical use?

No. The complete system must meet the required air-quality and installation specification, including any necessary drying, filtration, pipework, maintenance and validation requirements.

Need Help Sizing a Dr Sonic Dental Air System?

Speak to our compressed-air team about airflow, pressure, electrical supply, receiver capacity, drying, filtration and installation requirements.

Call 0121 753 3330

Industries We Support

Energy, Process & Heavy Industry
Food & Beverage
Automotive & Transport
Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors.
UK installation availableProfessional on-site setup by our experienced technicians.
Full Aftermarket SupportComprehensive spares and repairs always ready to go.
UK Based SupportLocal experts just a phone call away for any assistance.
Genuine Service PartsOnly original, high-quality service parts for your machine.
Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.
Scroll to Top