FINI Mini Cube 2.2 Air Compressors
Choose between 230 V and 400 V models, with floor-mounted or 90-litre receiver-mounted configurations
Choose the Right Mini Cube Configuration
All four models use the same compact 2.2 kW screw compressor platform. The main decisions are the electrical supply and whether you need a separate air receiver or an integrated 90-litre receiver package.
230 V Single Phase
A practical route where three-phase power is unavailable. Confirm the local electrical supply, cable and protection are suitable for the compressor.
400 V Three Phase
Suited to sites with an appropriate three-phase supply and commonly preferred in industrial installations.
Floor Mounted
Best where a separate receiver is already installed or where the compressor must be incorporated into an existing compressed air system.
90-Litre Receiver Mounted
A compact combined package that adds local air storage and simplifies smaller installations where a separate receiver is not already available.
FINI Mini Cube 2.2 Models
FINI Mini Cube 2.2-10M Floor Mounted
2.2 kW • 9.2 CFM • 10 Bar
Sale
FINI Mini Cube 2.2-10 Floor Mounted
2.2 kW • 9.2 CFM • 10 Bar
Sale
FINI Mini Cube 2.2-10M-90
2.2 kW • 9.2 CFM • 10 Bar • 90 L
Sale
FINI Mini Cube 2.2-10-90
2.2 kW • 9.2 CFM • 10 Bar • 90 L
SaleMini Cube Model Comparison
| Model Type | Power Supply | Receiver | Best For |
|---|---|---|---|
| Floor Mounted | 230 V | Separate receiver required where needed | Sites without three-phase power and existing compressed air systems |
| Floor Mounted | 400 V | Separate receiver required where needed | Industrial sites with three-phase supply and existing system equipment |
| 90 L Receiver Mounted | 230 V | Integrated 90-litre receiver | Compact single-phase installations needing local air storage |
| 90 L Receiver Mounted | 400 V | Integrated 90-litre receiver | Compact three-phase installations requiring a combined package |
FINI Mini Cube Buying Guide
Is 9.2 CFM enough for my application?
Add the free air requirements of tools and processes that may operate at the same time. The compressor should be selected from usable delivered airflow, working pressure and duty rather than receiver size alone.
Should I choose 230 V or 400 V?
Choose the voltage that matches the available site supply. Confirm cable size, isolation and electrical protection with a suitably competent electrician before installation.
Do I need the 90-litre receiver-mounted version?
The receiver-mounted version is useful where a separate receiver is not already installed or where a compact combined package is preferred. Floor-mounted models are better suited to integration with an existing receiver and air-treatment system.
Is the Mini Cube suitable for continuous use?
The Mini Cube uses rotary screw technology and is intended for regular-duty applications. The final suitability depends on the required airflow, ambient conditions, ventilation and operating hours.
Will I need a dryer and filtration?
Many workshop and industrial applications benefit from a refrigerated dryer and line filtration. The required air quality depends on the tools, process and acceptable moisture level.
Where should the compressor be installed?
Install the compressor in a clean, dry and well-ventilated location with sufficient clearance for cooling airflow and routine servicing.
Why Choose a FINI Mini Cube?
The FINI Mini Cube provides rotary screw compressor performance in a compact enclosed package. It is particularly useful where a conventional piston compressor is too noisy or where the application needs a smoother and more consistent air supply.
Compact Footprint
Designed for workshops and installations where plant-room space is limited.
Low-Noise Enclosure
Better suited than many open piston compressors to areas near operators.
Plug & Play Format
A practical packaged solution with straightforward controls and installation.
Flexible Configurations
Choose floor-mounted or receiver-mounted, with 230 V and 400 V options.
FINI Mini Cube FAQs
What is the difference between the 230 V and 400 V Mini Cube?
The main difference is the electrical supply. Choose the model that matches the available site power and confirm the installation requirements with an electrician.
What is the difference between floor-mounted and receiver-mounted models?
Floor-mounted models connect to a separate receiver where required. Receiver-mounted models include a 90-litre air receiver as part of the package.
Does the 90-litre receiver increase the CFM?
No. The receiver stores compressed air but does not increase the compressor's continuous delivered airflow.
Is the Mini Cube suitable for a workshop?
Yes, where the workshop's airflow, pressure and running-hour requirements fall within the compressor's capability. Its compact and enclosed design can be useful where space and noise are important.
Can Compressed Air Systems UK install and service the Mini Cube?
Yes. Compressed Air Systems UK can provide installation, pipework, planned servicing, repairs and technical support, subject to the site and equipment requirements.
Industries We Support
Support & Aftercare
Our Expert Services
24/7 EMERGENCY BREAKDOWN
Rapid response for all air compressor malfunctions, anytime you need us.
View ServiceINSTALLATIONS
Expert design and bespoke pipework installations tailored to your site.
View ServiceSERVICING
Comprehensive maintenance to keep your air systems running at peak performance.
View ServiceVISIT OUR TRADE COUNTER
Come meet our experts in person at our dedicated Birmingham trade hub.
Get DirectionsSHOP NOW
Browse our full range of air compressors, parts, and industrial tools online.
Go To ShopCONTACT US
Have a question? Reach out to our team today for expert advice and support.
Send Message