Industry leaders since 1992
Fast delivery
Trade counter collection
Experts available 24/7
Read our Trustpilot reviews
Compact 230V Workshop Air

Wall Mounted Air Compressors

Compact oil-free wall mounted compressors with integrated hose reels for garages, workshops and maintenance areas where floor space is limited.

Space-Saving Compressed Air for Light Workshop Duties

Wall mounted air compressors keep the compressor and hose storage off the floor, creating a convenient fixed compressed-air point without taking up normal workshop floor space. The range combines compact 230V single-phase, oil-free machines for inflation, blow-off, cleaning and suitable intermittent pneumatic-tool use.

The models in this range use 1.1 kW motors and operate up to 8 bar. Stated airflow is piston-compressor displacement, so tool selection should be based on the usable air requirement and duty cycle rather than headline CFM alone.

1.1 kW / 230V
5.6-6.3 CFM Displacement
Oil-Free Design
Integrated Hose Reels

Shop Wall Mounted Air Compressors

Compare Fini Genius, Fini Genius PRO and Stanley Fatmax WALLTECH PRO wall mounted compressors below. Choose according to airflow, receiver requirement and the type of intermittent workshop or inflation work you need to carry out.

Compare Wall Mounted Air Compressors

ModelMotorAirflowPressureReceiverSupply
Fini Genius Standard1.1 kW / 1.5 HP5.6 CFM / 170 L/min displacement8 barNo receiver230V single phase
Fini Genius PRO1.1 kW / 1.5 HP5.6 CFM / 170 L/min displacement8 bar2 litre230V single phase
Stanley Fatmax WALLTECH PRO1.1 kW / 1.5 HP6.3 CFM / 180 L/min displacement8 bar2 litre230V single phase
The stated CFM figures are displacement figures for these piston compressors, not confirmed free air delivery. Check the actual air consumption of your tool or process before selecting a compressor.

Which Wall Mounted Compressor Is the Best Fit?

Fini Genius StandardA compact wall mounted option with a 9 metre hose reel and no receiver. Best where minimum footprint and simple intermittent compressed air are the priority.
Fini Genius PROAdds a 2 litre receiver while retaining the compact wall mounted format, oil-free pump and integrated 9 metre hose reel.
Stanley WALLTECH PROA 2 litre wall mounted model with 6.3 CFM stated displacement for suitable light workshop, garage and maintenance tasks.

Typical Uses

Tyre InflationConvenient for vehicle, bicycle and general workshop inflation where the required pressure is within the compressor rating.
Blow Guns & CleaningUseful for intermittent blow-off and cleaning tasks, allowing time for the compressor to recover between higher-airflow bursts.
Light Pneumatic ToolsSuitable only where the tool's real air consumption and duty cycle are comfortably within the compressor's usable output.
Impact wrenches, sanders, spray equipment and other high-consumption tools can require substantially more usable airflow. For demanding or continuous use, a larger piston or rotary screw compressor may be the better route.

Installation & Selection Guidance

Mounting SurfaceThe wall or bulkhead and its fixings must safely support the compressor and operational vibration. Follow the manufacturer's mounting requirements.
Electrical SupplyThe models in this range are 230V single-phase machines. Confirm the supply and circuit are suitable before installation.
Ventilation & AccessAllow cooling airflow and enough clearance for inspection, hose access and routine maintenance.

Wall Mounted Air Compressor FAQs

What is a wall mounted air compressor?

It is a compact compressor designed to be secured to a suitable wall or bulkhead. These models combine the compressor with an integrated hose reel so the machine does not occupy normal floor space.

Are wall mounted compressors oil free?

Yes. The Fini Genius Standard, Fini Genius PRO and Stanley Fatmax WALLTECH PRO models on this page use oil-free compressor technology.

Can a wall mounted compressor run an impact wrench?

Only if the wrench's actual airflow requirement and duty cycle are within the compressor's usable output. Many impact tools need more continuous airflow than a compact 5.6-6.3 CFM displacement compressor can provide.

What is the difference between the Fini Genius Standard and Genius PRO?

Both are 1.1 kW, 230V, 8 bar wall mounted oil-free compressors with integrated 9 metre hose reels. The Standard model has no receiver; the Genius PRO adds a 2 litre receiver.

Does the receiver size determine compressor output?

No. Receiver capacity and compressor airflow are different specifications. A receiver stores compressed air, while the compressor's delivered airflow determines how quickly that air can be replenished.

Can you help me check whether one is suitable?

Yes. Send us the tool or equipment airflow requirement, working pressure, expected usage and available electrical supply and we can help compare the available options.

Need Help Choosing the Right Compressor?

If your tools need more air than a compact wall mounted machine can provide, we can also help with larger piston compressors, rotary screw compressors and complete compressed-air packages.

Industries We Support

Energy, Process & Heavy Industry
Food & Beverage
Automotive & Transport
Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all purchases.
UK installation availableProfessional on-site setup by our experienced technicians.
Full Aftermarket SupportComprehensive spares and repairs always ready to go.
UK Based SupportLocal experts just a phone call away for any assistance.
Genuine Service PartsOnly original, high-quality service parts for your machine.
Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.
Scroll to Top