Industry leaders since 1992
Fast delivery
Trade counter collection
Experts available 24/7
Read our Trustpilot reviews
Oil-Free • 230V • Dental & Laboratory Air

MGF GE + Mini Box Oil-Free Air Compressors

Compact 1.1 kW MGF Genesi compressor packages for dental, laboratory and other specialist clean-air applications, with open-frame, dryer-equipped and acoustically enclosed options.

Oil-Free Compression
1.1 kW / 1.5 HP
230V Single Phase
24L & 40L Receivers
Dryer & Silenced Options

Compact MGF Genesi Compressor Options

The GE + Mini Box family uses MGF's oil-free Genesi platform for installations where a compact footprint and clean compressed air are important. The range includes standard receiver-mounted units, models with integrated drying and quieter Mini Box cabinet configurations.

All models on this page use a 230V single-phase supply. Standard Genesi S versions provide up to 135 L/min (4.8 CFM) free air delivery, while membrane-dryer configurations are listed at 120 L/min (4.2 CFM).

Selection note: oil-free compression does not by itself define final air quality. Drying, filtration, pipework, commissioning and the requirements of the connected equipment should be considered as part of the complete installation.

Choosing Between Genesi S, Dryer and Mini Box Models

Standard Genesi SOpen receiver-mounted oil-free compressors where downstream drying and filtration are specified separately.
Genesi with DryerIntegrated air-treatment configurations for installations where moisture control is required within the compressor package.
Mini BoxAcoustically enclosed versions designed to reduce operating noise where the compressor is closer to occupied areas.

MGF Genesi Range Comparison

ConfigurationFree Air DeliveryReceiverNoiseDryer
24/10 Genesi S135 L/min / 4.8 CFM24 L65 dB(A)No
50/10 Genesi S135 L/min / 4.8 CFM40 L65 dB(A)No
Genesi dryer configurations120 L/min / 4.2 CFM24 L or 40 L65 dB(A)Integrated
Mini Box Genesi S135 L/min / 4.8 CFM24 L50 dB(A)No
Mini Box dryer configuration120 L/min / 4.2 CFM24 L50 dB(A)Integrated
Manufacturer data: the current MGF Genesi range uses 24-litre and 40-litre receivers. Some older product titles on the website may retain historic receiver wording; selection should be based on the verified technical specification for the exact model.

What to Check Before Ordering

Simultaneous DemandConfirm how many chairs, instruments or other air-consuming devices may operate at the same time.
Required PressureCheck the pressure needed at the connected equipment after treatment and distribution losses.
Drying RequirementChoose a dryer-equipped model where the application requires controlled moisture rather than relying on oil-free compression alone.
NoiseMini Box variants are useful where compressor noise needs to be reduced close to occupied rooms.
Installation SpaceAllow adequate ventilation, access for servicing and suitable clearance around the compressor package.
Clinical SpecificationWhere a dental or medical standard applies, assess the complete system rather than treating the compressor alone as the compliance measure.

MGF GE + Mini Box FAQs

Are the MGF Genesi compressors oil-free?

Yes. These Genesi models use oil-free compression, so compressor lubricant is not introduced into the compression process.

What is the difference between the standard and dryer-equipped versions?

The standard Genesi S models are supplied without an integrated dryer. Dryer-equipped configurations include air treatment within the package to help control moisture.

Why does the airflow reduce on some dryer-equipped versions?

MGF lists the standard Genesi S models at 135 L/min (4.8 CFM) and the membrane-dryer configurations at 120 L/min (4.2 CFM) free air delivery.

How quiet is the Mini Box?

MGF lists the Mini Box Genesi models at approximately 50 dB(A), compared with around 65 dB(A) for the open Genesi configurations.

Does an oil-free compressor automatically make a dental installation compliant?

No. Air quality and compliance depend on the complete installation, including drying, filtration, pipework, commissioning, maintenance and the requirements of the equipment being supplied.

Can Compressed Air Systems UK help choose the right model?

Yes. Send us the connected equipment, expected simultaneous demand, required pressure, available installation space and whether integrated drying is required.

Need Help Choosing an MGF Genesi Compressor?

Tell us your application, simultaneous air demand and whether you need a dryer or quieter cabinet configuration, and we can help narrow down the suitable model.

Industries We Support

Energy, Process & Heavy Industry
Food & Beverage
Automotive & Transport
Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors.
UK installation availableProfessional on-site setup by our experienced technicians.
Full Aftermarket SupportComprehensive spares and repairs always ready to go.
UK Based SupportLocal experts just a phone call away for any assistance.
Genuine Service PartsOnly original, high-quality service parts for your machine.
Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.
Scroll to Top