24/7 0121 753 3330 [email protected] [email protected] Spend £250+ and get free UK shipping Secure checkout
Account Basket Request a Quote
Industry leaders since 1992
Fast delivery
Trade counter collection
Experts available 24/7
Read our Trustpilot reviews
MGF Pure Air • Veterinary Applications • Compact Oil-Free Air

MGF Oil-Free Air Compressors for Veterinary Applications

Compact MGF oil-free compressed-air solutions for veterinary environments where dependable, quiet air supply and careful control of air quality matter. The MINI HELPADENT family is designed for portable and specialist applications including veterinary medicine.

View Veterinary CompressorCall 0121 753 3330
Oil-Free Compression
Compact 3 Litre Receiver
230V Supply
Low-Noise Design
Veterinary & Specialist Use

MGF MINI HELPADENT for Veterinary Applications

The product below is the veterinary MINI HELPADENT configuration currently offered through Tanair Compressors. It combines oil-free compression with a compact receiver format for professional environments where space, noise and clean compressed air are important considerations.

MGF's current MINI HELPADENT family is specified around approximately 50 L/min free air delivery at 5 bar, a 3 litre stainless-steel receiver and low operating noise. Because the product code has changed over time, we recommend confirming the exact supplied configuration against the connected equipment before ordering.

Selection note: oil-free compression does not by itself define the final air quality at the point of use. Check the connected equipment's pressure, flow, moisture, filtration and any applicable clinical or manufacturer requirements.

Why MGF MINI HELPADENT?

Oil-Free CompressionCompressor lubricant is not introduced into the compression process, supporting applications where oil carryover from the compressor is undesirable.
Compact FormatThe current MINI HELPADENT family uses a compact 3 litre receiver arrangement designed for portable and space-sensitive professional applications.
Low-Noise OperationCurrent MGF data quotes approximately 53 dB(A), helping when the compressor needs to operate close to staff, animals or treatment areas.
Veterinary ApplicationsMGF specifically identifies veterinary medicine among the intended applications for the MINI HELPADENT family.
230V OperationThe current MINI HELPADENT reference is designed around a standard 230V / 50Hz electrical supply.
Portable-Unit FamilyCurrent MINI HELPADENT variants are available in stationary or wheeled formats, depending on the required configuration.

Current MGF MINI HELPADENT Reference

SpecificationCurrent MGF MINI HELPADENT ReferenceSelection Note
Current MGF codeS-OF100-003-MHThe Tanair product below is an earlier configuration with a different stored SKU.
Free air delivery50 L/min / approx. 1.8 CFM @ 5 barConfirm required flow at the connected equipment's working pressure.
Receiver3 litre stainless-steel receiverSmall receiver suits compact/portable installations; check demand and duty.
Motor / supply0.7 kW / 230V 50HzConfirm local electrical supply and protection requirements.
NoiseApprox. 53 dB(A)Quoted by MGF for the current reference model.
Duty cycle50%Check the connected equipment's operating pattern before sizing.
Maximum pressure7 barConfirm the equipment operating pressure, not only maximum compressor pressure.
Important: the Tanair product record is an earlier MINI HELPADENT configuration and its stored headline airflow is rounded differently from current MGF literature. We have therefore kept the existing product identity and use current family data as a sizing reference rather than silently changing the product into a different current code.

Typical Veterinary Considerations

Equipment DemandConfirm the combined air consumption of the veterinary equipment that may operate at the same time.
Working PressureSize from free air delivery at the pressure required by the connected equipment rather than relying on displacement or maximum pressure.
Moisture & FiltrationIf the equipment has a stated dew-point, filtration or air-quality requirement, specify the complete treatment system accordingly.
Noise & LocationConsider where the compressor will be installed, including ventilation, service access, heat rejection and proximity to treatment areas.
Duty CycleA compact compressor should be matched to the actual operating pattern; continuous or high-duty applications may require a different MGF range.
Complete InstallationPipework, filtration, drying, commissioning and maintenance all affect delivered air quality and system reliability.

Veterinary Air Compressor FAQs

Is MINI HELPADENT intended for veterinary use?

Yes. MGF specifically lists veterinary medicine among the intended applications for the current MINI HELPADENT family.

Is the compressor oil-free?

Yes. MINI HELPADENT uses oil-free compression, so compressor lubricant is not introduced into the compression process.

What is the current MGF airflow reference?

MGF currently quotes 50 L/min, approximately 1.8 CFM, free air delivery at 5 bar for MINI HELPADENT. The earlier Tanair product shown on this page uses a slightly different historic headline figure, so final sizing should be confirmed before order.

Can it power any veterinary equipment?

No single compressor should be assumed suitable for every veterinary application. Check the connected equipment's required pressure, air consumption, duty cycle and any stated moisture, filtration or air-quality requirements.

Does oil-free mean the complete air supply automatically meets a clinical standard?

No. Oil-free compression is only one part of the system. Final suitability depends on the complete installation, including treatment, pipework, commissioning, maintenance and the requirements of the connected equipment or applicable standard.

What if my veterinary equipment needs more air or a higher duty cycle?

MGF offers larger Pure Air and heavy-duty ranges. We can size the compressor from the combined air demand, operating pressure, duty and electrical supply.

Can Compressed Air Systems UK help specify the system?

Yes. Send us the equipment make/model, required pressure and flow, expected operating pattern, available power supply and any stated air-quality requirement.

Need Help Specifying a Veterinary Air Compressor?

Tell us what equipment the compressor will supply, the required pressure and flow, operating pattern and available electrical supply, and we can help confirm the appropriate MGF configuration.

Request Specialist AdviceCall 0121 753 3330Back to MGF Pure Air

Industries We Support

Energy, Process & Heavy Industry
Food & Beverage
Automotive & Transport
Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors.
UK installation availableProfessional on-site setup by our experienced technicians.
Full Aftermarket SupportComprehensive spares and repairs always ready to go.
UK Based SupportLocal experts just a phone call away for any assistance.
Genuine Service PartsOnly original, high-quality service parts for your machine.
Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.

Our Expert Services

24/7 EMERGENCY BREAKDOWN

Rapid response for all air compressor malfunctions, anytime you need us.

View Service

INSTALLATIONS

Expert design and bespoke pipework installations tailored to your site.

View Service

SERVICING

Comprehensive maintenance to keep your air systems running at peak performance.

View Service

VISIT OUR TRADE COUNTER

Come meet our experts in person at our dedicated Birmingham trade hub.

Get Directions

SHOP NOW

Browse our full range of air compressors, parts, and industrial tools online.

Go To Shop

CONTACT US

Have a question? Reach out to our team today for expert advice and support.

Send Message
Scroll to Top