FINI VISION • Floor Mounted + Dryer

FINI VISION Floor-Mounted Screw Compressors with Dryer & Filtration

Integrated air packages from 7.5–22 kW combining a quiet fixed-speed FINI VISION screw compressor with refrigerated drying plus pre and final filtration, with 8, 10 and 13 bar options up to 118 CFM.

View Models Call 0121 753 3330

Compressed air generation and treatment combined in one compact floor-mounted package

These FINI VISION ES packages combine the screw compressor with an integrated refrigerated dryer plus pre and final filtration, helping reduce moisture and particulate contamination before air enters the downstream system.

Power options run from 7.5 to 22 kW with 8, 10 and 13 bar variants, so the package can be matched to both the airflow requirement and the true operating pressure of the site.

The floor-mounted format is particularly useful where an existing receiver is being retained or where air storage needs to be positioned separately from the compressor.

Integrated DryerRefrigerated drying helps remove condensate from compressed air before distribution.Pre + Final FiltrationAdditional filtration supports cleaner compressed air for downstream equipment.7.5–22 kWFive motor sizes with pressure options across the range.400V Three PhaseIndustrial three-phase electrical supply is required.
7.5–22 kWApprox. 27–118 CFM8 / 10 / 13 BarDryer + Filtration400V Three Phase
Select the compressor for the site airflow and working pressure first, then confirm that the integrated drying and filtration level suits the application. For critical air quality, process air or sensitive equipment, tell us what the air is being used for so we can check the treatment requirement.

15 Models

FINI VISION Floor-Mounted Range with Dryer & Filters

A compact compressor and air-treatment package for sites using a separate receiver or existing air storage.

[products skus=”F-V60SG92FNM860,F-V60SH92FNM860,F-V60SM92FNM860,F-V60SN92FNM860,F-V60SP92FNM860,F-V60SQ92FNM860,F-V60SR92FNM860,F-V60SS92FNM860,F-V60ST92FNM860,F-V60SU92FNM860,F-V60SV92FNM860,F-V60SZ92FNM860,F-V60SJ92FNM860,F-V60SY92FNM860,F-V60SW92FNM860″ limit=”15″ columns=”4″ orderby=”post__in”]

Model & Output Guide

Choose kW, airflow and pressure together

Higher pressure reduces the available airflow from a given motor size, so select the model at the actual pressure needed by your equipment. The figures below are a practical guide to the current VISION families.

Motor	Model Family	Approx. Output by Pressure	Pressure Options
7.5 kW	808 / 810 / 813	44 / 35 / 27 CFM	8 / 10 / 13 bar
11 kW	1108 / 1110 / 1113	58 / 53 / 41 CFM	8 / 10 / 13 bar
15 kW	1508 / 1510 / 1513	76 / 65 / 55 CFM	8 / 10 / 13 bar
18.5 kW	18.508 / 18.510 / 18.513	99 / 88 / 76 CFM	8 / 10 / 13 bar
22 kW	2208 / 2210 / 2213	118 / 106 / 85 CFM	8 / 10 / 13 bar

Configuration Guide

Understanding this floor-mounted compressor with integrated dryer and filtration range

Separate air receiver

Specify air storage independently to suit demand peaks, available space and the wider air system.

Flexible plant-room layout

The compressor can be positioned independently from the receiver and other air-treatment equipment where the installation requires it.

Sizing Advice

CFM, kW and pressure explained

CFM is delivered air

CFM is the figure to compare with the combined air consumption of tools, machines and processes that may operate at the same time.

kW is motor power

Motor kW helps identify compressor size, but the delivered CFM at the required pressure is the more useful figure for sizing the application.

Pressure must reach the point of use

Select 8, 10 or 13 bar from the pressure actually required after allowing for reasonable distribution and treatment losses.

Leave sensible spare capacity

A compressor selected exactly at current peak demand has little allowance for leaks, future equipment or changes in production demand.

Air Treatment

What the dryer and filters do

Refrigerated dryer

Cools compressed air so moisture can condense and be removed, helping reduce water in the downstream pipework.

Pre and final filtration

Filtration helps reduce contaminants carried in the compressed-air stream. The air-quality requirement should still be matched to the process and equipment being supplied.

For specialist processes, breathing air, very low dew-point requirements or sensitive production equipment, speak to our team before ordering so the complete treatment system can be checked.

Installation

Plan the installation before ordering

Confirm a suitable 400V three-phase electrical supply and protection for the selected model.
Provide adequate ventilation and clearance around the compressor for cooling and servicing.
Size the main pipework to minimise pressure drop at peak airflow.
Provide safe condensate drainage from receivers, dryers and filters where applicable.
Confirm access, lifting and final positioning before delivery of larger packages.

Compressed Air Systems UK can assist with compressor sizing, installation, pipework, commissioning and ongoing service support.

FAQs

FINI VISION frequently asked questions

What size FINI VISION compressor do I need?

Start with the total simultaneous CFM demand and the pressure required at the point of use. Choose a model that can supply that duty with useful spare capacity rather than selecting from kW alone.

Should I choose 8, 10 or 13 bar?

Use the lowest pressure that reliably meets the equipment requirement after allowing for system pressure drop. Higher pressure generally means lower available airflow and higher running cost.

Are FINI VISION compressors three phase?

Yes. The models on this page are industrial 400V three-phase compressors.

Does a larger receiver increase compressor CFM?

No. A receiver stores compressed air and can help with short peaks in demand, but continuous CFM is determined by the compressor itself.

Can Compressed Air Systems UK help with installation and servicing?

Yes. We can assist with sizing, installation, pipework, commissioning, planned servicing, repairs and ongoing compressed-air support.

Need help choosing the right FINI VISION package?

Tell us your equipment, required pressure, expected duty and current compressed-air setup. We can help match the compressor and installation to the application.

Call 0121 753 3330

Industries We Support

Energy, Process & Heavy Industry Food & Beverage Automotive & Transport Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors. UK installation availableProfessional on-site setup by our experienced technicians. Full Aftermarket SupportComprehensive spares and repairs always ready to go. UK Based SupportLocal experts just a phone call away for any assistance. Genuine Service PartsOnly original, high-quality service parts for your machine. Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.