FINI VISION • Receiver Mounted

FINI VISION Receiver-Mounted Screw Compressors

Space-efficient FINI VISION screw compressor packages mounted on 270 or 500 litre air receivers, covering 7.5–22 kW, 8–13 bar and outputs up to 118 CFM.

View Models Call 0121 753 3330

Compressor and air storage combined in one practical package

Receiver-mounted FINI VISION packages place the compressor above the air receiver to provide compressed-air generation and storage in a compact footprint.

The 7.5 and 11 kW families include both 270 and 500 litre receiver options. Higher-output 15, 18.5 and 22 kW models are offered on 500 litre receivers in the current range.

Choose the compressor from airflow and pressure first. Receiver capacity then helps provide useful stored air, smooth demand changes and reduce unnecessary cycling, but it does not increase the compressor’s continuous CFM output.

270 / 500 LitreReceiver options vary by motor size and package.7.5–22 kWFrom workshop duties to larger industrial demand.8 / 10 / 13 BarPressure variants allow closer matching to the application.400V Three PhaseIndustrial three-phase electrical supply is required.
7.5–22 kWApprox. 27–118 CFM270 / 500 Litre8 / 10 / 13 Bar400V Three Phase
Choose the compressor by CFM and pressure before choosing receiver size. A larger receiver provides more stored air and can help with short demand peaks, but it cannot compensate for a compressor that is too small for the site’s sustained air consumption.

21 Models

FINI VISION Receiver-Mounted Range

Choose the required kW, working pressure and receiver capacity for a compact compressor-and-storage package.

[products skus=”F-V91SG92FNM701,F-V83SG92FNM701,F-V91SH92FNM701,F-V83SH92FNM701,F-V91SM92FNM701,F-V83SM92FNM701,F-V91SN92FNM701,F-V83SN92FNM701,F-V91SP92FNM701,F-V83SP92FNM701,F-V91SQ92FNM701,F-V83SQ92FNM701,F-V83SR92FNM701,F-V83SS92FNM701,F-V83ST92FNM701,F-V83SU92FNM701,F-V83SV92FNM701,F-V83SZ92FNM701,F-V83SJ92FNM701,F-V83SY92FNM701,F-V83SW92FNM701″ limit=”21″ columns=”4″ orderby=”post__in”]

Model & Output Guide

Choose kW, airflow and pressure together

Higher pressure reduces the available airflow from a given motor size, so select the model at the actual pressure needed by your equipment. The figures below are a practical guide to the current VISION families.

Motor	Model Family	Approx. Output by Pressure	Pressure Options
7.5 kW	808 / 810 / 813	44 / 35 / 27 CFM	8 / 10 / 13 bar
11 kW	1108 / 1110 / 1113	58 / 53 / 41 CFM	8 / 10 / 13 bar
15 kW	1508 / 1510 / 1513	76 / 65 / 55 CFM	8 / 10 / 13 bar
18.5 kW	18.508 / 18.510 / 18.513	99 / 88 / 76 CFM	8 / 10 / 13 bar
22 kW	2208 / 2210 / 2213	118 / 106 / 85 CFM	8 / 10 / 13 bar

Configuration Guide

Understanding this receiver-mounted compressor range

270 litre receivers

Available on the 7.5 and 11 kW families. A useful choice where floor space matters and the stored-air requirement is moderate.

500 litre receivers

Available across the receiver-mounted range and standard on the larger 15, 18.5 and 22 kW packages.

Sizing Advice

CFM, kW and pressure explained

CFM is delivered air

CFM is the figure to compare with the combined air consumption of tools, machines and processes that may operate at the same time.

kW is motor power

Motor kW helps identify compressor size, but the delivered CFM at the required pressure is the more useful figure for sizing the application.

Pressure must reach the point of use

Select 8, 10 or 13 bar from the pressure actually required after allowing for reasonable distribution and treatment losses.

Leave sensible spare capacity

A compressor selected exactly at current peak demand has little allowance for leaks, future equipment or changes in production demand.

Air Treatment

Plan the receiver, dryer and filtration around the application

This configuration does not include an integrated refrigerated dryer. That gives you flexibility to size the receiver and treatment equipment separately for the site.

Use a correctly sized refrigerated or adsorption dryer where moisture control is required.
Choose filtration for the air quality needed by the downstream process.
Allow for pressure drop through dryers, filters and pipework when confirming operating pressure.

Installation

Plan the installation before ordering

Confirm a suitable 400V three-phase electrical supply and protection for the selected model.
Provide adequate ventilation and clearance around the compressor for cooling and servicing.
Size the main pipework to minimise pressure drop at peak airflow.
Provide safe condensate drainage from receivers, dryers and filters where applicable.
Confirm access, lifting and final positioning before delivery of larger packages.

Compressed Air Systems UK can assist with compressor sizing, installation, pipework, commissioning and ongoing service support.

FAQs

FINI VISION frequently asked questions

What size FINI VISION compressor do I need?

Start with the total simultaneous CFM demand and the pressure required at the point of use. Choose a model that can supply that duty with useful spare capacity rather than selecting from kW alone.

Should I choose 8, 10 or 13 bar?

Use the lowest pressure that reliably meets the equipment requirement after allowing for system pressure drop. Higher pressure generally means lower available airflow and higher running cost.

Are FINI VISION compressors three phase?

Yes. The models on this page are industrial 400V three-phase compressors.

Does a larger receiver increase compressor CFM?

No. A receiver stores compressed air and can help with short peaks in demand, but continuous CFM is determined by the compressor itself.

Can Compressed Air Systems UK help with installation and servicing?

Yes. We can assist with sizing, installation, pipework, commissioning, planned servicing, repairs and ongoing compressed-air support.

Need help choosing the right FINI VISION package?

Tell us your equipment, required pressure, expected duty and current compressed-air setup. We can help match the compressor and installation to the application.

Call 0121 753 3330

Industries We Support

Energy, Process & Heavy Industry Food & Beverage Automotive & Transport Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors. UK installation availableProfessional on-site setup by our experienced technicians. Full Aftermarket SupportComprehensive spares and repairs always ready to go. UK Based SupportLocal experts just a phone call away for any assistance. Genuine Service PartsOnly original, high-quality service parts for your machine. Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.