FINI VISION • Receiver + Dryer

FINI VISION Receiver-Mounted Screw Compressors with Dryer & Filtration

Complete compressed-air packages combining a FINI VISION screw compressor, 270 or 500 litre receiver, refrigerated dryer and pre/final filtration, covering 7.5–22 kW and outputs up to 118 CFM.

View Models Call 0121 753 3330

A complete packaged solution for compressed-air generation, storage and treatment

These FINI VISION ES packages combine the screw compressor, air receiver, refrigerated dryer and pre/final filtration into a coordinated compressed-air package.

The 7.5 and 11 kW families offer 270 and 500 litre receiver choices, while the 15, 18.5 and 22 kW packages use 500 litre receivers in the current range.

They are well suited to workshops and production sites wanting a compact installation with built-in air storage and treatment, while retaining the low-noise characteristics of the VISION range.

Complete PackageCompressor, receiver, refrigerated dryer and filtration are combined.270 / 500 LitreReceiver capacity depends on motor size and model.7.5–22 kWFive motor sizes with 8, 10 and 13 bar variants.400V Three PhaseIndustrial three-phase electrical supply is required.
7.5–22 kWApprox. 27–118 CFM270 / 500 LitreDryer + Filtration400V Three Phase
Start with required CFM and pressure, then select receiver capacity and confirm the required air quality. Refrigerated drying is suitable for many general workshop and industrial duties, but specialist processes may require a different dew point or additional treatment.

21 Models

FINI VISION Receiver-Mounted Range with Dryer & Filters

A packaged compressor, receiver and air-treatment solution with 8, 10 and 13 bar options.

[products skus=”F-V91SG92FNM801,F-V83SG92FNM801,F-V91SH92FNM801,F-V83SH92FNM801,F-V91SM92FNM801,F-V83SM92FNM801,F-V91SN92FNM801,F-V83SN92FNM801,F-V91SP92FNM801,F-V83SP92FNM801,F-V91SQ92FNM801,F-V83SQ92FNM801,F-V83SR92FNM801,F-V83SS92FNM801,F-V83ST92FNM801,F-V83SU92FNM801,F-V83SV92FNM801,F-V83SZ92FNM801,F-V83SJ92FNM801,F-V83SY92FNM801,F-V83SW92FNM801″ limit=”21″ columns=”4″ orderby=”post__in”]

Model & Output Guide

Choose kW, airflow and pressure together

Higher pressure reduces the available airflow from a given motor size, so select the model at the actual pressure needed by your equipment. The figures below are a practical guide to the current VISION families.

Motor	Model Family	Approx. Output by Pressure	Pressure Options
7.5 kW	808 / 810 / 813	44 / 35 / 27 CFM	8 / 10 / 13 bar
11 kW	1108 / 1110 / 1113	58 / 53 / 41 CFM	8 / 10 / 13 bar
15 kW	1508 / 1510 / 1513	76 / 65 / 55 CFM	8 / 10 / 13 bar
18.5 kW	18.508 / 18.510 / 18.513	99 / 88 / 76 CFM	8 / 10 / 13 bar
22 kW	2208 / 2210 / 2213	118 / 106 / 85 CFM	8 / 10 / 13 bar

Configuration Guide

Understanding this receiver-mounted compressor with integrated dryer and filtration range

270 litre receivers

Available on the 7.5 and 11 kW families. A useful choice where floor space matters and the stored-air requirement is moderate.

500 litre receivers

Available across the receiver-mounted range and standard on the larger 15, 18.5 and 22 kW packages.

Sizing Advice

CFM, kW and pressure explained

CFM is delivered air

CFM is the figure to compare with the combined air consumption of tools, machines and processes that may operate at the same time.

kW is motor power

Motor kW helps identify compressor size, but the delivered CFM at the required pressure is the more useful figure for sizing the application.

Pressure must reach the point of use

Select 8, 10 or 13 bar from the pressure actually required after allowing for reasonable distribution and treatment losses.

Leave sensible spare capacity

A compressor selected exactly at current peak demand has little allowance for leaks, future equipment or changes in production demand.

Air Treatment

What the dryer and filters do

Refrigerated dryer

Cools compressed air so moisture can condense and be removed, helping reduce water in the downstream pipework.

Pre and final filtration

Filtration helps reduce contaminants carried in the compressed-air stream. The air-quality requirement should still be matched to the process and equipment being supplied.

For specialist processes, breathing air, very low dew-point requirements or sensitive production equipment, speak to our team before ordering so the complete treatment system can be checked.

Installation

Plan the installation before ordering

Confirm a suitable 400V three-phase electrical supply and protection for the selected model.
Provide adequate ventilation and clearance around the compressor for cooling and servicing.
Size the main pipework to minimise pressure drop at peak airflow.
Provide safe condensate drainage from receivers, dryers and filters where applicable.
Confirm access, lifting and final positioning before delivery of larger packages.

Compressed Air Systems UK can assist with compressor sizing, installation, pipework, commissioning and ongoing service support.

FAQs

FINI VISION frequently asked questions

What size FINI VISION compressor do I need?

Start with the total simultaneous CFM demand and the pressure required at the point of use. Choose a model that can supply that duty with useful spare capacity rather than selecting from kW alone.

Should I choose 8, 10 or 13 bar?

Use the lowest pressure that reliably meets the equipment requirement after allowing for system pressure drop. Higher pressure generally means lower available airflow and higher running cost.

Are FINI VISION compressors three phase?

Yes. The models on this page are industrial 400V three-phase compressors.

Does a larger receiver increase compressor CFM?

No. A receiver stores compressed air and can help with short peaks in demand, but continuous CFM is determined by the compressor itself.

Can Compressed Air Systems UK help with installation and servicing?

Yes. We can assist with sizing, installation, pipework, commissioning, planned servicing, repairs and ongoing compressed-air support.

Need help choosing the right FINI VISION package?

Tell us your equipment, required pressure, expected duty and current compressed-air setup. We can help match the compressor and installation to the application.

Call 0121 753 3330

Industries We Support

Energy, Process & Heavy Industry Food & Beverage Automotive & Transport Manufacturing & Engineering
And many more — talk to us for help sizing the right solution for your application.

Support & Aftercare

WarrantyFull peace of mind guaranteed on all workshop compressors. UK installation availableProfessional on-site setup by our experienced technicians. Full Aftermarket SupportComprehensive spares and repairs always ready to go. UK Based SupportLocal experts just a phone call away for any assistance. Genuine Service PartsOnly original, high-quality service parts for your machine. Expert Air AdviceLeverage our 30+ years of technical compressed air knowledge.